Cantilever Consumable Nozzle Box Columns Beams Electro-Slag Welding Machine

• Cooling Way: Water Cooling
• Frequency Range: High Frequency
• Electroslag Welding Principle: Liquid Slag Produces Resistive Heat
• Classification: Wire Electroslag Welding, Plate Electroslag Weldin
• Welding Beams Thickness: More Than 30mm
• Submerged Arc Welding Machine Suitable: Less Than 30mm
• Model NO.: RS
• Weldable Joints: Butt Joints, T-Joints, Corner Joints and Cross Joi
• Electroslag Slag Pool Temperature: 1600~2000 Degree
• The Angle Between The Vertical Line Betw: Less Than 30 Degree
• Purpose: for Thick Plate Splicing
• Welding Range: for Welding of Steel or Iron-Based Alloys
• Voltage: 380~440V
• Rail Width: 1.5m
• Cantilever Trolley Travel: Customized
• Exported to: Russia,India,Dubai,Pakistan,Kuwait,etc
• Applicable Wire Diameter: 1.6mm
• Applicable Box Beam Length: 15m
• Transport Package: Containers
• Specification: Customized
• Trademark: Lemar
• Origin: Wuxi, China
• HS Code: 8515319900
• Production Capacity: 1000 PCS/Year

Product Description

 

In order to make the inner clapboard of the box beam and the upper and lower wing plates welded more tightly, the space required for vertical electroslag welding is reserved between the clapboard and the wing plate when assembling the clapboard, and the bottomed box beam is passed through the roller table, It is transported to the gantry type vertical electroslag welding machine, and the vertical electroslag welding machine hangs on the gantry frame to carry out vertical electroslag welding on the reserved hole of the workpiece.

The gantry frame can walk arbitrarily in the length direction of the box beams.
 

Specifications:

No.	Item	Specification
1	Applicable workpiece size	300~1500mm
2	Rack travel stroke	15500mm (rail length 18 -20M)
3	Gauge	5000mm
4	Total power	3KW
5	Power of flux recovery machine	2×3KW
6	Air source pressure	0.4~0.8Mpa
7	Welding speed	0.15~1.5m/min
8	Return speed	2.4m/min

 

Filament electroslag welding has the following characteristics:

(1) The welding direction of filament electroslag welding is from bottom to top, in a vertical state, so the axis of the welded joint is vertical.

(2) All welding actions are completed by the wire electrode electroslag welding machine, so it belongs to an automatic welding method. The operator only needs to control the whole welding process through the buttons on the control panel, and only manually measure when necessary. slag pool depth and add necessary flux.

(3) The gantry-type Box beam electroslag welding machine adopts a gantry mobile structure, which is driven by double motors, and travels stably and reliably.

(4) Equipped with two sets of welding swing mechanisms, which control the swing of the two welding torches respectively.
The amplitude and frequency of the swing can be adjusted within a certain range according to the requirements, and the welding holes of the Box beam can be swing welded.

(5) Welding current and voltage are adjusted respectively, and the welding torch is automatically raised with the rise of the liquid level of the slag pool.

(6) The box beam steel structure electroslag welding machine welding power source adopts Chengdu Zhenzhong welding power source, which has high welding efficiency and stable and reliable welding performance.