Automatic Assembly machine of 1500mm Box beam U beam production line :
The assembling machine is one of the equipments for the production of steel structures.
It is responsible for assembling steel structures, which is convenient for welding and modern equipment to increase work efficiency.
U-shaped/box girder assembly machine is a device that assembles the bottom plate, web and partition into box-shaped workpieces.
It is mainly composed of box girder erecting machine host, centering device, positioning device, hydraulic system and electric control system.
Specifications:
|
Model |
ZB-12 |
ZB-15 |
|
Suitable work-piece sizes(mm) |
300-1200 |
300-1500 |
|
Suitable thickness(mm) |
≤80 |
|
Max. load capacity(t) |
20 |
|
Gantry travel speed(m/min) |
4/6 |
|
Hydraulic system pressure(Mpa) |
16 |
|
Max. pressure of side cylinder(t) |
15 |
|
Max. pressure of upper cylinder(t) |
30 |
Advantages of box beam erection machine with automatic spot welding:
1. The steel assembly machine has good rigidity and is suitable for the assembly of beams with a thickness of 80mm, and the machine will not deform.
2. With anti-fall device, the side plate is prevented from falling over when the assembly is erected by hand-cranking the screw nut
3. The power supply of the host is connected with a sliding wire frame
4. An operation box is installed on the left and right sides of the gantry of the box beam erecting machine, which is convenient for the operator to control
4. The hydraulic station is located on the top of the gantry to avoid the drag of the oil pipe
Wuxi Lemar Machinery Equipments Co.,Ltd specializes in the production of complete H-beam box beam production lines. The production line includes blanking CNC Plasma flame gas cutting machine, Metal plate Beveling machine, built-in clapboard, U-shaped assembly, box assembly, electroslag welding, submerged arc welding machine in door form and cantilever form, etc., depending on customer requirements Depends.
Audited Supplier 
){kind=link}