3000 Kgs Turning Tilt Pipe Flange Welding Positioner Turntable

• Customization: Available
• Type: Welding Turntable
• Structure: Platform
• Model NO.: BWJ
• Rotaion Speed: 0.1-1rpm
• Max Eccentricity Distance: 200mm
• Tilting Angle: 0-120°
• Voltage: 110V/220V
• Condition: New
• Function: Pipe Flange Welding Turning Table
• Max Loading Weight: 10kg-200t Customized
• Other Names: Mini Welding Postioner Table
• Turntable Height: Customized
• Tilt Angle: 0-120
• Table Speed: 0.1-0.5
• Lead Time: 3 Days
• Suitable Chuck: Kd-150/200/300/400/500/600
• Rotate Speed: 2-20rpm
• Filt Mode: Manual
• Optional: TIG MIG Mag Welder
• Welder Holder: Yes
• Oversize: Customized
• Warranty: 1 Year
• Certificate: CE
• Trademark: Lemar
• Origin: Wuxi, China
• HS Code: 8428909090
• Production Capacity: 3000PCS/Year

Product Description

As a welding table that can rotate 360 degree and tilt 0-120 degree, the welding positioner is an indispensable welding auxiliary machine in the automatic welding of pipes and tanks.

Automatic welding positioner is an integral welded structure with sufficient strength and rigidity.

The frame is made of tailor-welded section steel and steel plate, and a welding table flip bearing seat is installed on the wall panels on both sides.

The worktable is a steel plate welded structure, reinforced with reinforcing ribs, and has multiple concentric grooves, which can be used for positioning (usually, the workpiece is compressed by a chuck

Specifications:
 

No.	Item	Specification
1	Rated load (kg):	3000
2	Table diameter (mm):	φ1400
3	Rotation speed (rpm):	0.1~0.5
4	Flip angle:	0°~+120°
5	Turnover speed (rpm):	0.2
6	Eccentricity at rated load (mm):	200
7	Center of gravity distance at rated load (mm):	200
8	Slewing drive power (kW):	1.5
9	Flip drive power (kW):	2.2

 

 

The permanent magnet DC stepless speed regulating motor is selected, and the motor is equipped with a reduction box to drive the large and small gears to rotate, thereby driving the table surface of the positioner to rotate, realizing 0-90°, 0-360° infinite rotation

Welding positioner Product applicable working conditions and working environment:

1. Ambient air temperature range: -10ºC~40ºC;
2. Air relative humidity: the average relative humidity in the wettest month is 90%;
3. Grid voltage fluctuation: within ±10% (when grid frequency is rated value);
4. Grid frequency fluctuation: ≤±1% (when grid voltage is rated value).

  

The welding turning table can be turned over freely, and the worm gear structure is convenient for operation

Working environment:

The TIG welding positioner should be placed in a place where there is no serious hazard or affect the normal use of the welding overturning table with explosive or corrosive industrial gases, water vapor, salt spray and chemical deposits, and should be kept away from severe vibrations and bumps.

Adopt new technology circuit boards, advanced components, small size and full functions. Iron sheet resistors and integrated circuits make the performance of the tank welding turntable more stable, the protection function is stronger, and the anti-interference ability is stronger

Stepless speed change, the working speed of the pipe positioner can be adjusted arbitrarily according to the welding requirements, which is convenient for welding

With timing function, it will automatically stop working when the time is set

The positioner has the function of welding linkage

Whether it is the gear box of the motor or the large and small gears of the transmission part, they have been quenched at high temperature and have good wear resistance.

Special foot switch, with reset function and foot function. The reset function of the welding positioner means that in the automatic state of the positioner, once the foot switch is stepped on, the positioner and the welding machine can be automatically started or stopped; Foot switch, the positioner works, release the foot switch, the positioner does not work

The positioner is equipped with a carbon brush, which has strong conductivity and high safety factor

A dust cover is added under the working table, which can effectively prevent splashes from falling on the gears.