Automatic H Beam I Beam Hydraulic Flange Straightening Machine

• Usage: H Beam Flange
• Automatic Grade: Automatic
• Certification: CCC, ISO9001, CE
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: JZJ-60
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Model: Jzj-60
• Straightening Mode: Hydraulic
• Max Flange Thickness: 60mm
• H Beam Material: Q345/Q235
• Power: 26kw
• Flange Width: 200-1000mm
• Roller Material: 35CrMo
• Hydraulic Station: 1 Set
• Roller Hardness: HRC50-55
• Straightening Wheel Speed: 8.9m/Min
• Delivery: 30 Days
• Straightening Speed: 6m/Min
• Min Web Height: 350mm
• High Pressure Straightening Force: 2800kn
• Function: H Beam I Beam Flange Straightener
• Transport Package: Nude
• Trademark: Lemar
• Origin: Wuxi, China
• HS Code: 8462291000
• Package Size: 430.00cm * 173.00cm * 250.00cm
• Package Gross Weight: 14000.000kg

Product Description

Automatic H beam I beam Hydraulic flange straightening machine

H-beam hydraulic straightening machine is used to correct the surface deformation of the H-beam flange plate during the welding process. The upper roller device adopts an axle box structure, which has a large bearing capacity. The adjustment distance is driven by a hydraulic cylinder, which is stable and reliable.

The main oil cylinder adopts high-quality sealing ring, which has good sealing performance and long service life

There is a fine filter on the pump station to ensure the long-term reliable use of the solenoid valve
 

The driving wheel and the straightening wheel are all made of high-quality alloy steel and have undergone advanced heat treatment technology to ensure that they will not have cracks and other defects after long-term use.

The active rollers on both sides are hydraulically lifted to prevent the roller from being damaged when the workpiece is rectified and separated from the roller, ensuring convenient operation.

The equipment consists of main motor, reducer, driving roller, straightening roller device, driving roller lifting cylinder, web and wing plate clamping device, main frame, machine base, front and rear conveyor rollers, hydraulic system, electrical system, etc.
 

Specification:

Straightening thickness of flange	60mm
Length of roller rack	Input/Output 2600mm*3 sets
Width of flange plate	150-800mm
Web height	350mm
Thickness of flange plate	6-60mm
Height of H beam web	200-1000mm(customized)
Material of H beam	Q235/Q345
Total power	25kW
Straightening speed	6.3m/min
Working pressure	32Mpa

Note: With foundation or without is according to your needs.  

 

 
How to maintain the H-beam hydraulic straightening machine?

1. When using the H-beam straightening machine, the first thing is to clean the equipment, that is, to remove all the debris that hinders the operation of the equipment and the H-beam, especially the welding seam that hinders the walking of the steel.

2. Adjust the relative position of the upper frame according to the width and thickness of the revised H-shaped steel flange plate, so that the hole can meet the needs of the H-shaped steel range.

3. To carry out the straightening operation of the H-beam mechanical or hydraulic straightening machine, the transmission parts must run smoothly without jamming, overheating and other abnormal phenomena.

4. Send the end of the H-shaped steel to the straightening machine to stop the operation of the main drive roller, and start the downforce motor according to the thickness of the wing plate and its deformation.

5. According to the thickness of the web and the width of the fins, adjust the position of the guide roller of the H-beam T-beam hydraulic 60mm 80mm thickness straightener, so as to ensure that the guide roller will not be subjected to excessive axial force.