Straightening Machine for 40mm Flange Thickness H Beam Steel

• After-sales Service: Online Video Instruction
• Type: H Beam Flange Straightening Machine
• Usage: H Beam Flange
• Voltage: 380V-440V
• Automatic Grade: Automatic
• Principle: Deformation After H Beam Welding
• Model NO.: JZJ-800
• Certification: CCC, ISO9001, CE
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Function: Straightening for H Beam Flange Plate
• Straightening Mode: Hydraulic or Mechanical Type H Beam Straightener
• Max Flange Thickness: 40mm
• H Beam Material: Q345/Q235
• Power: Customized
• Suitable for H Beam Length: 12m
• Flange Width: 200-1000mm
• Input Roller Length: 9m
• Output Roller Length: 9m
• Colour: Customized
• Roller Material: 35CrMo
• Hydraulic Station: 1 Set
• Roller Hardness: HRC50-55
• Straightening Wheel Speed: 8.9m/Min
• Delivery: 45 Days
• Transport Package: Nude
• Trademark: Lemar
• Origin: Wuxi, China
• HS Code: 8462291000

Product Description

Machine introduction:
Mechanical & Hydraulic Straighteners are part of the standard shop equipment of many metalworking companies.

After the H-beam is welded by the gantry type submerged arc welding machine, the flange plate will be deformed due to the shrinkage of the weld. This flange plate straightening machine is suitable for straightening H-section T-section steel formed by welding.

Working principle:
Based on the principle of lever formed by the upper roller and the transmission roller, when the flange to be corrected passes through, bending deformation occurs. Since the preset force is greater than the yield point of the material of the flange, the elastic recovery coefficient becomes smaller, so as to achieve the purpose of correction.

 
Specification:
 

Model	JZJ600	JZJ800
Straightening material	Q235	Q235
Flange width	160-600mm	200-800mm
Flange thickness	≤20mm	≤40mm
Minimum height of web	160mm	350mm
Power	380V 50HZ	380V 50HZ
Correction speed	8.5m/min	9m/min
Total power	6.6KW	13.2KW
Active Roller Material	40CR	40CR
Main drive motor	Cycloidal pinwheel reducer drives the driving roller to rotate
Hydraulic pump	Chinese Famous brand

Machine Features:

1. The main machine of the H-beam flange plate straightening machine is an integral frame structure, which eliminates stress, has a compact structure and high strength. To ensure that its long-term use will not produce cracks and other defects

2. The main cylinder adopts high-quality sealing ring, which has good sealing performance and long service life.

3. All adjustment actions have dials to ensure convenience and accuracy.

4. The straightening roller adopts the axle box structure, which has a large bearing capacity.

Installation steps of steel H-beam flange straightening machine:

1. The installer should clean and decontaminate the various parts of the H-beam flange plate straightening machine

2. Install the base according to the basic drawing we provide, and do the second glue filling

3. The roller surface of the driving roller must be 3-5mm higher than the front and rear roller surfaces

4. Check the lubricating parts before the test run, and carry out full lubricating work for the equipment
 

 

Machine maintenance and safety technology
1. It is necessary to check whether there is any abnormal phenomenon at the joint of the moving parts and the fixed parts of the H-beam flange plate straightening machine, and the looseness of the fasteners.

2. During the operation of the H beam I beam flange straightening machine, it is absolutely not allowed to start the pressing and lifting device.

3. It is close to the side of the transmission, and should not be approached during the working process to prevent accidents.

4. Each straightening piece is not allowed to be turned over or stacked on the entry and exit roller table of H-beam and T-beam.

5. Lubricate and check each sliding part before going to work.
 

FAQ:

1. How to choose hydraulic type and mechanical type for H-beam flange plate straightening machine?
We can customize the H-beam flange plate straightening machine for you according to the size requirements of the H-beam.
Generally, the mechanical H-beam T-beam straightening machine is suitable for the thickness of the flange plate <=40mm, and the hydraulic steel structure straightening machine is suitable for the thickness of the flange plate 40mm~80mm.

2. In addition to the flange plate straightening machine, what other equipment is required for the production of H-beam and box-beam production lines?
The type of equipment and the quantity purchased need to be based on the layout of your company's on-site factory. Before purchasing the machine, we recommend that the customer send us the factory layout plan for design.
A complete H-beam box beam production line includes:
CNC Plasma Flame cutting machine-Automatic assembly machine with gas shield welder-Gantry type Submerged arc or gas shield welding machine-H beam flange straightener-End face milling machine.
If for Box beam production need Electroslag welding machine, Box beam assembly machine and  spot welding machine, etc.

3. How to provide installation service?
Under normal circumstances, we will arrange engineers to go to your factory for on-site installation guidance. But for now, due to the global virus outbreak, we currently offer installation instruction manuals, as well as online video instructions. These installation manuals have been able to ensure that customers can successfully complete the installation and commissioning of the machine

4. How to visit your company?
We can pick you up from Shanghai Pudong International Airport, Hongqiao International Airport or Wuxi Airport. Or Wuxi Railway Station.

5. What should I do if the machine is broken?
The warranty period for our machines is 12 months. If the damaged parts cannot be repaired, we can send new parts to replace the damaged parts, but you need to pay for the courier yourself. After the warranty period, we can negotiate and provide technical support for the entire life cycle of the equipment.

6. Can you be responsible for shipping?
Yes, please tell us the port of destination or address. We have rich experience in transportation. FOB, CIF or EXW will do price calculation according to your needs.

7. Do you provide OEM service?
Of course, we can design equipment based on the structural section data you provide. We are a professional designer and manufacturer of H-beam production line equipment and automatic pipe welding equipment.