| Customization: | Available |
|---|---|
| Type: | 3D Welding Table |
| Structure: | Platform |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Feature | D28 Welding Table | D16 Welding Table |
Hole Size | 28mm (Heavy-duty) | 16mm (Light/Medium-duty) |
Workpiece Suitability | Large structures, heavy welding | Small/medium parts, precision welding |
Load Capacity | Higher (5+ tons) | Medium (typically 1-3 tons) |
Typical Industries | Shipbuilding, wind power, heavy machinery | Automotive, mold making, general manufacturing |
Aspect | Cast Iron | Q355 (Structural Steel) |
Material Category | Iron-carbon alloy with high carbon content (2-4%), produced by casting. | Low-alloy high-strength structural steel (GB/T 1591-2018), produced by rolling/forging. |
Common Types | Gray Iron, Ductile Iron. | Replaces the old grade Q345. |
Key Composition | High carbon (2-4%), high silicon (1-3%), low manganese (0.1-1%). | Low carbon (≤0.24%), low silicon (≤0.55%), manganese (1.0-1.6%), with microalloys (Nb, V, Ti). |
Mechanical Properties | Tensile Strength: 120-400 MPa (low) | Tensile Strength: ≥355 MPa (actual: 470-630 MPa) |
Brittle, low toughness | High toughness, impact resistance | |
High hardness (HB 150-300) | Moderate hardness (HB 130-180) | |
Poor weldability | Excellent weldability. | |
Manufacturing Process | Casting (molten metal poured into molds). Ideal for complex shapes. | Hot/cold rolling, forging. Easy to cut, weld, and machine. |
Applications | Engine blocks, machine tool bases, pipes, cookware (e.g., cast iron pans). | Structural frameworks (buildings, bridges), ships, pressure vessels, machinery. |
Advantages | Cost-effective, wear-resistant, good vibration damping. | High strength-to-weight ratio, ductile, suitable for dynamic loads. |
Limitations | Brittle, difficult to machine post-casting. | Requires corrosion protection in harsh environments. |
Parameter | D16 Series | D22 Series | D28 Series |
Application | Small precision parts, electronic assembly | Medium-sized components, multi-station setups | Heavy-duty equipment, large structural parts |
Load Capacity | Medium (≤2 tons) | High (≤5 tons) | Extreme (≥10 tons) |
Flexibility | Optimal (dense small holes) | Balanced | Focused on strength |
Typical Industries | Automotive parts, laboratories | Construction machinery, rail transit | Shipbuilding, energy equipment |
Comparison Item | 3D Welding Table | 2D Welding Table |
Degrees of Freedom | X/Y/Z three-axis adjustable, multi-angle welding | Only horizontal fixation |
Suitable Workpieces | Complex curved surfaces, irregular structures | Flat or simple three-dimensional workpieces |
Efficiency | Reduces repeated clamping time | Suitable for batch welding at single angles |
Cost | Higher | Lower |
){kind=link}