HP1530 Roller Conveyor Type Blast Cleaning Machine for H Beam I Beam

• Customization: Available
• After-sales Service: Overseas Engineer
• Warranty: 13 Months
• Model NO.: HP1530
• Application: H Beam Shot Blasting Machine
• Cleanliness: High Cleanliness
• Automation: Automatic
• Certification: CE, CB
• Condition: New
• Customized: Customized
• Power: 220~440V
• Model: HP1520
• Beam Size: 1500*2500mm
• Blaster Heads: 8 or 10 or 12
• Overall Power: 145kw
• Convey Speed: 0.5-5m/Min
• Main Frame: 7800*3200*3700mm
• Conveyor Loading: 200kg/M
• Circulation Quantity: 120t/H
• H Beam Length: 4000-15000 mm
• Blaster Head Power: 11kw
• Blasting Cleanness: High Cleanness Level
• Work for: H Beam I Beam Shot Blasting Machine
• OEM: Yes
• Exported to: Kuwait,Brazil,India,etc
• Transport Package: Containers
• Trademark: Lemar
• Origin: Wuxi, China
• HS Code: 8424300000

Product Description

 

H-beam shot blasting machine is a roller type shot blasting machine, which is mainly used in construction and other industries.

H beam I beam sand shot blasting machine is used for stress relief and surface rust cleaning of steel structure parts with large I-beam and H-beam with high size.

Roller pass-through shot blasting machine, adjustable electrically controlled during cleaning
 

Specifications of HP1525 H beam Shot blasting machine
  

Type		HP 1020	HP 1525	HP 1530
Size of the work-piece	section(L*W)	1000*2000 mm	1500*2500mm	1500*3000mm
	work	4000-15000 mm	4000-15000mm	4000-15000mm
Quality standard	cleanness	A-B Sa2-Sa2½	A-B Sa2-Sa2½	A- B Sa2-Sa2½
Shot blaster	numbers	8	8/10	8/10/12
	power	8*11Kw	8/10*11Kw	8/10/12*15Kw
In and out converyor	loading	200kg/m	1000kg/m	1000kg/m
	speed	0.5-5m/min	0.5-5m/min	0.5-5m/min
Circulation quantity		120T/h	120T/h	120T/h
Nominal size(L*W*H)		6770*2900*3150mm	7895*2985*3460mm	7895*3500*3760mm
Total power		125kw	135kw	148kw

The shot blasting machine is mainly composed of 4 parts:

1.The shot blasting machine generally uses a high-speed rotating impeller to project the projectile in the direction under the action of high centrifugal force. During the working process, some shot blasting wheels can swing angularly or move up and down.
2.projectile collection, separation and transportation system.
3.The carrier that makes the casting run and turn continuously during the shot blasting cleaning process.
4.Dust removal system.
Sandblasting room: no deep pit (or no pit), low infrastructure cost and short construction period.

The working principle of H-beam I-beam cleaning by roller pass-through shot blasting machine:
During the cleaning process, the steel structure or steel is sent to the projectile area in the cleaning machine room by the electrically controlled adjustable-speed conveying roller table, and all sides of the body are hit and rubbed by strong and dense projectiles from different coordinate directions, so that the The oxide skin, rust layer and its dirt will fall off quickly, and the steel surface will get a smooth surface with a certain roughness.
The projectiles and rust dust falling on the H-shaped steel are blown by the purging device, and the scattered dust mixture is transported to the chamber body hopper by the recovery screw, and the vertical and horizontal screw conveyors are collected in the lower part of the elevator, and then lifted to the machine. In the upper separator, the separated pure projectiles fall into the separator hopper for shot blasting recycling.
The dust generated by the roller type H-beam I-beam shot blasting machine is sent to the dust removal system by the exhaust pipe. The purified air is discharged into the atmosphere, and the granular dust is captured and collected.